Stout 72-4 XHD Brush and Root Grapple

Description: Made entirely with high strength 50,000 psi Steel! Stout's XHD Brush grapple with 4" tine spacing is available in 72" width and is equipped with two grapples. The bucket tines are 3/8" thick with the outer tines on each end of the bucket being 1/2" thick and all tines stand approximately 4" tall. The top and bottom square tubes that make up the rear frame are 3"x3" and the forward tube behind the tine spreader in 2.5" diameter. The grapple arms are 1/2" thick and connected with a 3/8" web making for a very durable grapple. All pivot points are fully grease-able and hoses are fully sleeved for protection and held in place with a hose keeper. Weights 865 lbs. Unit 900 lbs. Shipping Height - 30" Depth - 38" 4" Tine Spacing Tine thickness - 1/2" End Tines, 3/8" Middle Tines Grapple Opening 32" Grapple Width 18" Grapple Pivot Points Fully Grease-able Mount Specs are J2513, the Skid Steer Universal Quick Attach 1/2" Flat Face Couplers Hoses are Fully Encased in Protective Sleeves Hose Keeper Hydraulic Cylinders Automatically Adjust to Uneven Bucket Loads When Closing Hydraulic Cylinders Bore x Stroke - 2"x8" 2500 Working PSI Fully Grease-able Pivot Points Made Entirely of Grade 50 Steel Made in the USA Quantity: 1