ジョンディア/John Deere 1910 G

Chains Gunnebo 19/16 2 pairs 1 new spare wheel

Carrier John Deere 1910 G with chipper Bruks 806.2 STC Year model 2019 but first used in January 2020 The machine will in first place be sold completely but it can also be possible to split the carrier and chipper as separate units. JD 1910 G, serial number 1WJ1910GAKL002225 Year model 2019 but first used in January 2020 About 12 000 working hours Crane CF885 with 8,5-meter reach 8 Wheels 780x28,5 with 90-95% tires + 1 new spare wheel Chains Gunnebo 2 pairs Cooling on differentials (front and rear) and split-box by hydraulically driven heat exchanger Extra diesel tank During the last year there have been done some bigger repairs on the machine:  New tires  Front differential replaced  Hydraulic pump (the bigger) exchanged to latest version at 6000 hour The forwarder is under service agreement with JohnDeere and service have been done according to that. Service on Ad-Blue system every 1500 hours. This agreement is valid until 12 000 hours but can be extended. Mobile Chipper 806.2 STC, second hand Chipper unit: Bruks 806.2 STC, serial number 8060092 Year model 2019 but first used in January 2020 About 7 600 working hours. Scania DC13 313A diesel engine, 500 hp Control system DASA 5 with Bruks program Infeed system with 5 roller table Chipper drum with two full length knives, 40-45 mm chip-length Screen XL, Chip tube standard Chip bin 24 m 3. 2,95 meter wide. High and side dumping. Scania DC13 313A diesel engine, 500 hp Control system DASA 5 with Bruks program Infeed system with 5 roller table Chipper drum with two full length knives, 40-45 mm chip-length Screen XL, Chip tube standard Chip bin 24 m 3. 2,95 meter wide. High and side dumping. Notes: During the last year there have been done some bigger repairs on the machine:  The diesel engine has been refurbished with new pistons, liners and connecting rod bearings. The connecting rods has been measured and checked. The Cylinderheads have been pressurized and completly overhauled  The complete chipper house has been replaced  Shaft to chipper drum and bearings have been replaced  Hydraulic tank has been replaced  Hydrostatic pump has been replaced  Fire extinguish-system reviewed with new control box and new fluids The hydraulic oil has been analysed without remarks Time after renovation approx 650 hours