Pezzolato Pth 700-660

# Pezzolato PTH 700/660 — Electric Drum Chipper with Infeed Conveyor **Year of manufacture:** 2016 **Total installed power:** 114.4 kW **Type:** Stationary industrial unit, electric drive **Included:** Infeed conveyor for logs and wood residue --- ## Overview Pezzolato PTH 700/660 industrial drum chipper with electric drive, supplied complete with infeed conveyor. The machine is configured **above standard specification**: whereas the series PTH 700/660 E is normally supplied with a 75 kW drive, this unit is fitted with a **110 kW main motor**. The closed drum design produces uniform, high-quality chips regardless of the type and shape of the raw material, which makes the machine suitable for continuous production of fuel-grade chips. ## Service history The machine was operated from **late 2016 until mid-2019**, then taken out of service **because it was no longer required for the owner's operations — not due to any fault or defect**. It was regularly maintained throughout its working life and was fully operational when it was stopped. Since then it has been stored under cover. Recommissioning is expected to require the usual service work after standing: lubrication, fluid checks, insulation testing of the motors, and possible replacement of individual wear parts. **The machine is offered on this basis and the price reflects it.** The electronic control panel logs operating data and generates scheduled and unscheduled maintenance prompts in accordance with the manufacturer's service plan. Full records are available for inspection. ## Technical specifications Drum diameter 660 mm Drum width 640 mm Feed opening (max.) 400 mm Feed roller diameter 520 mm Chamber diameter 740 mm Max. log diameter 360 mm Drum speed 830 rpm Blade speed 29 m/s Main drive motor 110 kW Feed roller motors 2 × 2.2 kW Total power 114.4 kW Airborne noise level 107 dB ## Drive and configuration Three electric motors: one driving the drum, two driving the upper and lower feed rollers. Material is delivered to the machine by the **included conveyor**, suitable for both logs and sawmill residue. ## Applications - Biomass power plants - Pellet and briquette production - Sawmills requiring reduction of wood residue - Chipping yards The machine handles sawmill waste as well as small-diameter logs. ## Commercial notes - Wear parts are readily available, quick to replace and reasonably priced, which keeps operating costs low - Electric drive: no combustion engine, low running cost, minimal drivetrain wear - **A three-phase industrial supply is required** — prospective buyers should confirm that their site connection is rated for the installed load - Original documentation available - **Inspection and test run by arrangement**