Geda 500 ZP /1000 Z
税別価格
8
お気に入り
シェア
検索結果を保存印刷
情報
機械カテゴリー
垂直昇降型リフト
メーカー／型式
Geda 500 ZP /1000 Z
製造年
2025
コンディション
未使用
機械の所在地
Wrocław, dolnośląskie
国
ポーランド
一般グレード
1
2
3
4
5
マスカス ID
3A2071FB
価格
通貨を選択
詳細
最大リフト容量
1000 kg
コンディション情報/保証
Nowe, gwarancja 12 miesięcy
製造国
ドイツ
証明書
CE
その他情報
Hello,
As the General Distributor of the Geda brand in Poland, we present transport platforms for persons and material Geda 500ZP / 1000 Gen 2 for 12m:.
Special passenger and material platform with galvanised steel mast based on Geda 500 Z/ZP. A unit with a specially increased load capacity increased from 850 kg to 1000 kg!
1. Load capacity: 500 kg or 5 person for persons mode or 1000 kg for material mode.
2. Lifting speed: 12/24 m/min.
3. Lifting height: 100 m ( current version 12 m)
Geda 500 ZP /1000 Z has been specially designed for use in harsh construction site conditions. The unit is extremely flexible and, with two separate controls, it can be used as a material lift with a very good lifting capacity of 1000kg or simply as a transport platform for transporting people and material. Lifting speeds of 24m/min for material transport and 12m/min for personal transport guarantee rapid construction progress. The hoist is an indispensable support for the rapid assembly of scaffolding as well as for subsequent work at the construction site. Geda 500ZP / 1000Z With minimal space requirements, high load capacity and various application options, the construction hoist saves time and ensures optimum logistics processes on site. Every construction site has its own challenges. Different platform versions with different loading doors and flaps therefore allow optimum adaptation of the GEDA 500 Z/ZP to the requirements on site. The spacious loading platform without cover provides sufficient space for all types of construction materials.
Set consisting of:
- Foot section with 4 adjusting spindles and base mast 2.3 m
- Load platform A 1,60 x 1,40m, 1 loading flap /1 unloading flap (Load capacity 1000 kg)
- Send- and collect-control unit permanently installed, key switch (incl. automatic reset in material mode), assembly control (with separate key) and power socket 230 V
- Trolley with drive unit 3.0/6.1 kW/400 V/50 Hz and overspeed safety brake
- Safety stop approx. 2 m above the ground with warning sound and repeating of the drive command
- Operation and emergency limit switches at top and bottom
- Integrated monitoring of the mast screwing and mast end
- Overload protection with indication
- Integrated monitoring of the mast screwing and mast end
- Manual control with 5 m cable, plug-in type
- Control for drop test with 10 m cable, plug-in type
- Automatic lubrication system
- Tear off securing for trailing cable
- Hour meter
- Anti-smashing-device
- Roof rotatable and tiltable
- Cable bin with trailing cable 25 m lifting height (futher lenghts upon request)
- GEDA UNI-X-MAST 1.5 m (hot dip galvanised) with four captive screws (M16) and nuts
-Set of mast ties for wall fixing with fixing tubes
- Trailing cable guide
Upon request, we can prepare an offer for other specifications and additional assortmentもっと表示する
High-Tech Sp. z o.o.
Strzegomska 55G 53-611 Wrocław Dolnośląskie ポーランド
1
マスカス利用歴（年）メール通知を受け取る
不審な掲載機械を報告