Teknamotor Skorpion 160 SD Holzhäcksler Häcksler Chipper 販売中 - ポーランド

金額応相談
金額応相談
Teknamotor Skorpion 160 SD Holzhäcksler Häcksler Chipper
Teknamotor Skorpion 160 SD Holzhäcksler Häcksler Chipperのビデオ
Teknamotor Skorpion 160 SD Holzhäcksler Häcksler Chipperのビデオ

基本情報

機械カテゴリーウッドチッパー
メーカー／型式Teknamotor Skorpion 160 SD Holzhäcksler Häcksler Chipper
製造年2024
追加オプション未使用
国
マスカス IDB76AFAC8
+ 詳細を表示
陸送・船積など見積もり・相談窓口

価格

税別価格金額応相談

詳細

フルサービス履歴はい
一般評価(1-5)
運搬時重量930 kg
運搬時寸法（全長X全幅X全高）3700x1760x2250
mm
タンク容積40 リットル
製造国ポーランド
アタッチメントThe chipper SKORPION 160 SD is the best choice for people involved in community service activities and for road companies; its high chipping capacity (the maximum diameter of worked branches is 160 mm) and small dimensions allow convenient use of the machine in urban areas and on roadsides during seasonal logging.

Weight 930 [kg]
Branch diameter 160 [mm]
No of knives 2 cutting + 2 counter-knife
Feeding speed up to 33 [running meters/min]
Chipping capacity up to 12 [stère meters/h]
Chip width from 9 to 11 [mm]
Feeding unit hydraulic feeder
Disk diameter 550 [mm]
Hopper dimensions (width x height) 285 x 180 [mm]

ENGINE TECHNICAL DATA
Engine model KOHLER Command PRO EFI ECH980
Engine cubic capacity 999 [cm3]
Power of engine 38 [hp]
Type of cooling -air
Type of fuel petrol
Fuel tank capacity 40 [l]
Start-up -electric
その他情報The chipper SKORPION 160 SD is the best choice for people involved in community service activities and for road companies; its high chipping capacity (the maximum diameter of worked branches is 160 mm) and small dimensions allow convenient use of the machine in urban areas and on roadsides during seasonal logging.

The high efficiency of this machine is achieved by the use of disc cutting system and BRIGGS&STRATTON Vanguard EFI 37 engine with power of 37 hp or KOHLER Command PRO EFI ECH980 engine with power of 38 hp or LONCIN LC2V90FD engine with power of 32,6 hp; a 2-cylinder, air-cooled petrol engine fitted with a mask. Optionally the propulsion system is a three-cylinder liquid-cooled diesel engine Kohler-Lombardini KDW 1003 with capacity of 24,5 hp or Kohler-Lombardini KDW 1404 (25 hp). In order to maintain many hours of continuous operation, the chopper is equipped with a 40 liter fuel tank.

The throat 285 mm wide and 180 mm high allows chopping branches, boughs and limbs (also leaves and needles), as well as round wood to diameter of 16 cm.

This model’s cutting system is made by a disc equipped with two cutting blades, co-working with two counter knives. The cutting knives life has been optimized by their double-sided sharpening, which allows them to be rotated by 180°, resulting in twice the length of their use. All the knives are made of appropriately selected tool steel and subjected to professional heat treatment. In addition, the chipper disc also fulfills the task of a fan and ejects the produced chips through the ejection tube, which can be positioned in any direction at a full 360° radius.

Its feed system consists of two pulling rollers, driven by separate hydraulic motors from a hydraulic pump mounted on the chipper.

Safety of the operator of a chipper is ensured by a cable safety switch attached, which - by pulling the cord in any direction - causes the hydraulic feed system to stop immediately. Unlocking the system takes place by releasing / unlocking the EMERGENCY STOP button to the work position.

The wood chipper equipped with an electronic No-stress system that automatically prevents overloading of the drive system by temporarily stopping the feed system. Editing the No-stress overload system allows you to easily change the machine settings and adjust them to individual needs. The program "thick wood", "thin wood" allows a quick change of the working mode of the chipper to suit the currently shredded material and more effective work of the wood chipper. This system has a built-in hourly meter.

The Skorpion 160 SD chopper has received European approval, which permits registration of the machine and traffic approval. It is equipped with overrunning brake and parking brake, modern LED traffic lights and a choice of spherical or eye catch.

Overall dimensions (LxWxH) 3700 x 1760 x 2250 [mm]
Weight 890 - 930* [kg]
Branch diameter 160 [mm]
No of knives 2 cutting + 2 counter-knife
Feeding speed up to 33 [running meters/min]
Chipping capacity up to 12 [stère meters/h]
Chip width from 9 to 11 [mm]
Feeding unit hydraulic feeder
Disk diameter 550 [mm]
Hopper dimensions (width x height) 285 x 180 [mm]

Engine model KOHLER Command PRO EFI ECH 980 / Briggs&Stratton VANGUARD EFI 37 / Loncin LC2V90FD
Engine cubic capacity 999 / 993 / 999 [cm3]
Power of engine 38,0 / 37,0 / 32,6 [hp]
Type of cooling -air
Type of fuel petrol
Fuel tank capacity 40 [l]
Start-up -electric

Engine model Kohler-Lombardini KDW 1003 / Kohler-Lombardini KDW 1404
Engine cubic capacity1028 / 1372 [cm3]
Power of engine 24,5 / 25 [hp]
Type of cooling -liquid
Type of fuel Diesel
Fuel tank capacity 40 [l]
Start-up -electric
Teknamotor Sp. z o.o.
  • +48 ...表示
    販売店に問い合わせる際には「マスカスに掲載されている機械」とお伝えいただければ、スムーズにお取引いただけます。
メール送信

販売主　姓／名前

  • TOMASZ　SZCZEPANIAK

    Teknamotor Sp. z o.o.
    • +48 ...表示
      販売店に問い合わせる際には「マスカスに掲載されている機械」とお伝えいただければ、スムーズにお取引いただけます。
    • +48 ...表示
      販売店に問い合わせる際には「マスカスに掲載されている機械」とお伝えいただければ、スムーズにお取引いただけます。
    • +48 ...表示
      販売店に問い合わせる際には「マスカスに掲載されている機械」とお伝えいただければ、スムーズにお取引いただけます。
    • 対応言語：ドイツ語、英語、ポーランド語、ロシア語、ウクライナ語
    • ul. Świętokrzyska 2a，27-400 Ostrowiec Świętokrzyski，ポーランド

会社

TEKNAMOTOR SP. Z O.O.

14
マスカス利用年数
すべての出品機械
不審な掲載機械を報告
関連メーカー
メーカー出品数：
ジョンディア/John Deere1057
Timberjack481
Ponsse452
Valmet407
キャタピラー346

マスカス・ジャパンで販売中のTeknamotor Skorpion 160 SD Holzhäcksler Häcksler Chipper製ウッドチッパーです。このTeknamotor Skorpion 160 SD Holzhäcksler Häcksler Chipperの価格は-、2024年製造です。この機械はポーランドの- より出品されております。マスカスにはTeknamotor Skorpion 160 SD Holzhäcksler Häcksler Chipperの他にも他メーカーの機械も ウッドチッパーに多数出品されています。 詳細 - フルサービス履歴：はい, 一般評価(1-5)：5, 運搬時重量：930 kg, 運搬時寸法（全長X全幅X全高）：3700x1760x2250 mm, タンク容積：40 リットル, 製造国：ポーランド