Teknamotor Skorpion 250 SDTG Wood Chipper 販売中 - ポーランド

金額応相談
金額応相談
Teknamotor Skorpion 250 SDTG Wood Chipper
Teknamotor Skorpion 250 SDTG Wood Chipperのビデオ
Teknamotor Skorpion 250 SDTG Wood Chipperのビデオ

基本情報

機械カテゴリーウッドチッパー
メーカー／型式Teknamotor Skorpion 250 SDTG Wood Chipper
製造年2024
追加オプション未使用
国
マスカス ID5E4F1057
+ 詳細を表示
陸送・船積など見積もり・相談窓口

価格

税別価格金額応相談

詳細

フルサービス履歴はい
運搬時重量2,220 kg
タンク容積60 リットル
アタッチメントThe model SKORPION 250 SDTG made by Teknamotor is the most technologically advanced mobile disc chipper available to community services, road companies and forestry sector. Thanks to its high processing capacity (the maximum diameter of the cut branches is 25 cm), it is excellent at grinding tree trunks and branches; its throat is 420 mm wide and 255 mm high.

Overall dimensions (LxWxH) 4500 (5160 ready to work) x 2150 x 2560 mm
Weight 2220kg
Branch diameter 250mm
No of knives 2 or 3 cutting + 2 counter-knife
Feeding speed up to 42 running meters/min
Chipping capacity up to 22 stère meters/h
Chip width from 9 to 14 mm
Disk diameter 800 mm
Hopper dimensions (width x height) 420 x 255 mm

ENGINE TECHNICAL DATA
Engine model KOHLER KDI2504TCR HATZ 4H50TICD
Displacement 2482 1952 [cm3]
Power of engine 75 HP
Type of cooling liquid
Type of fuel diesel
Fuel tank capacity 60 l
その他情報The model SKORPION 250 SDTG made by Teknamotor is the most technologically advanced mobile disc chipper available to community services, road companies and forestry sector. Thanks to its high processing capacity (the maximum diameter of the cut branches is 25 cm), it is excellent at grinding tree trunks and branches; its throat is 420 mm wide and 255 mm high.

The driving system in this model makes a four-cylinder turbocharged Kohler or Hatz diesel engine with power of 74,8 hp; it is liquid-cooled and as a standard fitted with a mask. In order to maintain many hours of continuous operation, the chipper is equipped with a 60 liter fuel tank.

The standard hopper has been replaced with a hand-folded loading table. The material feed drive system consists of a toothed upper roller and a crawler feeder installed in the hand-folded feed table. This solution allows easier loading of wood, which improves the operator's performance and improves efficiency. The roller and caterpillar is driven by hydraulic motors with reducers from the pump installed on the chipper.

The cutting system in scorpion 250 SDTG is made by a disc equipped with two or three cutting blades, working with two counter knives. The cutting knives life has been optimized by their double-sided sharpening, which allows them to be rotated by 180°, resulting in twice the length of their use. All the knives are made of appropriately selected tool steel and subjected to professional heat treatment. In addition, the chipper disc also fulfills the task of a fan and ejects the produced chips through the ejection tube, which can be positioned in any direction at a full 360° radius.

Safety of the operator of a chipper is ensured by a cable safety switch attached, which - by pulling the cord in any direction - causes the hydraulic feed system to stop immediately. Unlocking the system takes place by releasing / unlocking the EMERGENCY STOP button to the work position.

Skorpion 250 SDTG is equipped with one of the most modern electronic No-stress systems available on the European market; the system automatically prevents overloading of the drive system by temporarily stopping the feeding. Editing the No-stress overload system allows you to easily change the machine settings and adjust them to individual needs. The program "thick wood", "thin wood" allows a quick change of the working mode of the chipper to suit the currently shredded material and more effective work of the wood chipper. This system has a built-in hourly meter.

The Skorpion 250 SDTG chopper has received European approval, which permits registration of the machine and traffic approval. It is equipped with overrunning brake and parking brake, modern LED traffic lights and a choice of spherical or eye catch.

The wood chips obtained through the chipping process can be used for direct combustion in furnaces, for production of compost, for decorative purposes and, after repeated shredding in hammer mill, as a raw material for production of briquettes and pellets.

Overall dimensions (LxWxH) 4500 (5160)* x 2150 x 2560 [mm]
Weight 2220 [kg]
Branch diameter 250 [mm]
No of knives 2 or 3 cutting + 2 counter-knife
Feeding speed up to 42 [running meters/min]
Chipping capacity up to 22 [stère meters/h]
Chip width from 9 to 14 [mm]
Disk diameter 800 [mm]
Hopper dimensions (width x height) 420 x 255 [mm]

ENGINE TECHNICAL DATA
Engine model KOHLER KDI2504TCR / HATZ 4H50TICD
Displacement 2482 / 1952 [cm3]
Power of engine 74,8 [HP]
Type of cooling liquid
Type of fuel diesel
Fuel tank capacity 60 [l]

()* - unfolded, ready to work

Equipment included:
-Counter of operating hours
-Spare wheel
-Adjustment of height of ejecting the chips
-Rotary chimney 360°
-No-stress system

Additional accessories on request:
-Extension of the ejection tube
Teknamotor Sp. z o.o.
  • +48 ...表示
    販売店に問い合わせる際には「マスカスに掲載されている機械」とお伝えいただければ、スムーズにお取引いただけます。
メール送信

販売主　姓／名前

  • TOMASZ　SZCZEPANIAK

    Teknamotor Sp. z o.o.
    • +48 ...表示
      販売店に問い合わせる際には「マスカスに掲載されている機械」とお伝えいただければ、スムーズにお取引いただけます。
    • +48 ...表示
      販売店に問い合わせる際には「マスカスに掲載されている機械」とお伝えいただければ、スムーズにお取引いただけます。
    • +48 ...表示
      販売店に問い合わせる際には「マスカスに掲載されている機械」とお伝えいただければ、スムーズにお取引いただけます。
    • 対応言語：ドイツ語、英語、ポーランド語、ロシア語、ウクライナ語
    • ul. Świętokrzyska 2a，27-400 Ostrowiec Świętokrzyski，ポーランド

会社

TEKNAMOTOR SP. Z O.O.

14
マスカス利用年数
すべての出品機械
不審な掲載機械を報告
関連メーカー
メーカー出品数：
ジョンディア/John Deere1057
Timberjack481
Ponsse452
Valmet407
キャタピラー346

マスカス・ジャパンで販売中のTeknamotor Skorpion 250 SDTG Wood Chipper製ウッドチッパーです。このTeknamotor Skorpion 250 SDTG Wood Chipperの価格は-、2024年製造です。この機械はポーランドの- より出品されております。マスカスにはTeknamotor Skorpion 250 SDTG Wood Chipperの他にも他メーカーの機械も ウッドチッパーに多数出品されています。 詳細 - フルサービス履歴：はい, 運搬時重量：2,220 kg, タンク容積：60 リットル