Teknamotor SKORPION 280 SDBG Holzhäcksler Häcksler Rębak Wood 販売中 - ポーランド

金額応相談
金額応相談
Teknamotor SKORPION 280 SDBG Holzhäcksler Häcksler Rębak Wood
Teknamotor SKORPION 280 SDBG Holzhäcksler Häcksler Rębak Woodのビデオ
Teknamotor SKORPION 280 SDBG Holzhäcksler Häcksler Rębak Woodのビデオ

基本情報

機械カテゴリーウッドチッパー
メーカー／型式Teknamotor SKORPION 280 SDBG Holzhäcksler Häcksler Rębak Wood
製造年2024
追加オプション未使用
機械の所在地Ostrowiec Świętokrzyski、świętokrzyskie
国
マスカス IDE72A92EC
+ 詳細を表示
陸送・船積など見積もり・相談窓口

価格

税別価格金額応相談

詳細

動力タイプディーゼル
一般評価(1-5)
運搬時寸法（全長X全幅X全高）3750x1810x2400
mm
タンク容積40 リットル
その他情報SKORPION 280 SDBG is the smallest produced by Teknamotor drum-type chipper. Large loading table, 265 mm wide and 190 mm high inlet allows chipping branches with offshoots (with leaves and needles) as well as a round timber of the diameter up to 180 mm.

The feeding system consists of built on a rocker toothed roll of the diameter of 280 mm and a feeding table equipped with toothed 680 mm in length chain feeder, preceded by manually folded flap. This solution makes the loading much easier, improves the work of operator and increases the efficiency. Both - roll and chain feeder - are powered by hydraulic gear motors driven by own hydraulic pump installed on the chipper.

The propulsion system is a liquid-cooled diesel engine with capacity of 24,5 hp (three-cylinder) or 25 hp (four-cylinder) and as a standard fitted with a mask. Optionally the propulsion system is a due-cylinder air-cooled petrol engine with capacity of 37 or 32,6 hp. In order to maintain many hours of continuous operation, the chipper is equipped with a 40 liter fuel tank.

A sector-type drum with three cutting knives (one rotation of the drum for one full cut) allows to achieve a very high potential of the chipper. Knives - produced out of special alloy steel and properly heat treated - can be sharpened several times - even 20 mm of the nominal size, assuring theirs long-term use.

As a standard, the chipper is equipped with a speed control of feeding which allows production of chips in the range of 5 - 25 mm in length. With this solution the Client can produce small chips which - after further processing on hammer mills - can be used to produce briquettes or pellets.

Installed screen ensures high regularity if chips. Chips are advanced from under the screen to the fan by a screw conveyor, than discharged thorough the ejection tube. The chipper is equipped with manually swiveled by 360° ejection tube.

As a standard, the chipper is also additionally equipped with one of the most advanced electronic system of work control available on European market automatically protecting the propulsion system of the machine against overload/excessive duty through temporary stopping the feeding unit. Easily editable software of the No-stress system provides a simple way to change the settings of the machine adapting it to individual needs. Preset "thick wood" and "thin wood" modes allow fast and easy change of the operation of the chipper in order to match the current material to be shred and increase the effectiveness of work.

Chipper Skorpion 280 SDBG has got the EC Vehicle Type- Approval Certificate which allows registration of the machine and licensing it for the road traffic.

Overall dimensions (L x W x H) 3750 (4460)* x 1810 x 2300 (3100)* [mm]
Weight 1540 - 1620** [kg]
Branch diameter 180 [mm]
No of knives 3 cutting + 1 counter-knife
Feeding speed up to 22 [running meters/min]
Chipping capacity up to 10 [stère meters/h]
Chip width to 25 depends on material [mm]
Way of feeding - toothed roll and hydraulically driven feeder track
Drum diameter 420 [mm]
Screen 30x30 or 50x50 [mm]
Hopper dimensions (width x height) 265 x 190 [mm]

ENGINE TECHNICAL DATA (Diesel)
Engine model KOHLER-Lombardini KDW 1003 / KOHLER-Lombardini KDW 1404
Engine cubic capacity 1028 / 1375 [cm3]
Power of engine 24,5 / 25 [hp]
Type of cooling liquid
Type of fuel diesel
Fuel tank capacity 40 [l]
Start-up electric

ENGINE TECHNICAL DATA (Petrol)
Engine model BRIGGS&STRATTON Vanguard EFI 37 / LONCIN LC2V90FD
Engine cubic capacity 993 / 999 [cm3]
Power of engine 37 / 32,6 [hp]
Type of cooling air
Type of fuel petrol
Fuel tank capacity 40 [l]
Start-up electric

* - dimension after the loading table is unfolded, during operation.
** - weight depends on equipment.

Standard equipment:
- Spare wheel.
- Swivelled by 360° ejection tube with deflector.
- Feeding table with a chain feeder.
- Electronic system of work control with hour meter.
Teknamotor Sp. z o.o.
  • +48 ...表示
    販売店に問い合わせる際には「マスカスに掲載されている機械」とお伝えいただければ、スムーズにお取引いただけます。
メール送信

販売主　姓／名前

  • TOMASZ　SZCZEPANIAK

    Teknamotor Sp. z o.o.
    • +48 ...表示
      販売店に問い合わせる際には「マスカスに掲載されている機械」とお伝えいただければ、スムーズにお取引いただけます。
    • +48 ...表示
      販売店に問い合わせる際には「マスカスに掲載されている機械」とお伝えいただければ、スムーズにお取引いただけます。
    • +48 ...表示
      販売店に問い合わせる際には「マスカスに掲載されている機械」とお伝えいただければ、スムーズにお取引いただけます。
    • 対応言語：ドイツ語、英語、ポーランド語、ロシア語、ウクライナ語
    • ul. Świętokrzyska 2a，27-400 Ostrowiec Świętokrzyski，ポーランド

会社

TEKNAMOTOR SP. Z O.O.

14
マスカス利用年数
すべての出品機械
不審な掲載機械を報告
関連メーカー
メーカー出品数：
ジョンディア/John Deere1057
Timberjack481
Ponsse452
Valmet407
キャタピラー346

マスカス・ジャパンで販売中のTeknamotor SKORPION 280 SDBG Holzhäcksler Häcksler Rębak Wood製ウッドチッパーです。このTeknamotor SKORPION 280 SDBG Holzhäcksler Häcksler Rębak Woodの価格は-、2024年製造です。この機械はポーランドの- より出品されております。マスカスにはTeknamotor SKORPION 280 SDBG Holzhäcksler Häcksler Rębak Woodの他にも他メーカーの機械も ウッドチッパーに多数出品されています。 詳細 - 動力タイプ：ディーゼル, 一般評価(1-5)：5, 運搬時寸法（全長X全幅X全高）：3750x1810x2400 mm, タンク容積：40 リットル