Lantzmann PROC20E+ 480 automatic

Lantzmann PROC20E+ 480 Automatic Firewood Processor: A powerful, fully hydraulic firewood processor equipped with an electric motor. The machine features a hydraulic infeed system and a conveyor belt measuring 350 cm in length and 30 cm in width. The conveyor belt is raised and lowered using a winch. The firewood length can be adjusted as required. The maximum log length is 61 cm, and the maximum diameter is 48 cm. The price includes a 3.2-metre conveyor with a winch and a 180 cm hydraulic infeed table with an electromagnetic switch. The chainsaw cuts the wood to the selected length. The splitter then divides the pre-cut log into six pieces, and the processed firewood is transported by the conveyor belt to the selected location. The machine can process almost any type of wood. The firewood processor is equipped with a 3.2 m conveyor belt that can transport the processed wood directly onto a trailer. The maximum discharge height is 2 m. The 250 mm wide discharge conveyor can be rotated to the right or left. The average output of the 20-tonne model is 3–4 m³ per hour, depending on the type of wood and the operator’s experience. Various optional accessories are available, including a hydraulic log-lifting system and a hydraulic log infeed table. Technical Specifications: — Power: 7.5 kW — Automatic sawing: yes — Maximum log diameter: 48 cm — Maximum log length: 61 cm — Hydraulic infeed table length: 180 cm — Motor speed: 4,800 rpm — Conveyor with winch: 3.2 m long, 250 mm wide — Conveyor angle adjustment: manual, ±15° — Saw chain: 22 inches — Cylinder bore: 4 inches — Working cycle time: 6 seconds — Tyres: 12 inches — Splitting wedge: 6-way — Weight: 550 kg Service and support are also available after purchase. We provide a warranty, servicing, spare parts.