クラース（Claas) Lexion 670
税別価格
13
お気に入り
シェア
検索結果を保存印刷
情報
機械カテゴリー
コンバイン
メーカー／型式
クラース（Claas) Lexion 670
使用時間数
1899 時間
機械の所在地
Kėdainių raj., Kauno·apskritis
国
リトアニア
マスカス ID
46626B3A
価格
通貨を選択
詳細
作業幅
770 cm
その他情報
Engine Caterpillar 6 cyl./9.3 1 capacity
Rated engine power - 305 kW/415 hp (ECE R 120)
Maximum engine power - 330 kW/449 HP (ECE R 120)
Rated engine speed 1900 rpm
Meets the TIER 4i environmental standard. Exhaust fuel recirculation system-EGR with exhaust gas filtration system
Auto Contour system - longitudinal and transverse copying of the soil surface
Wide stone trap
Hydraulic tilt chamber reverser
*Vacuum cleaner
A shaker board from individual segments is pulled out from the front
APS - system (drum accelerator and threshing drum system)
Drum Accelerator Features:
1. level and disperse the mass and feed it to the threshing drum at high speed
2. in the drum accelerator, easily disintegrating grains are threshed.
After the grains fall out through the under-drum of the drum accelerator, they fall directly onto the sieves. In this way, up to 30% of the work is done in the accelerator drum and the threshing drum is not loaded. At the same time, the throughput of the combine in tons is increased
in an hour.
The diameter of the drum accelerator is 450 mm.
The angle of enclosure of the drum accelerator is 70°
The area under the drum accelerator is 0.47 m2
Threshing drum width 1.7 m.
Threshing drum diameter 600 mm.
The threshing drum cover angle is 142°
The under-drum area of the threshing drum is 1.26 m2
Threshing drum rotation range 395 - 1150 rpm.
Closed threshing drum, number of snaps 8 pcs.
Drums 7/18 mm. The front drum is made up of three parts, if one part is damaged it is not necessary to replace the whole drum
The gap between the drums and sub-drums is controlled electro-hydraulic from the cab. The drums have a built-in protection. (If a stone slips near the drum and tries to block the drum, the sub-drum automatically retracts allowing the stone or other obstruction to slip through the gap)
Quantity of key shakers - 6 pcs., length 4.40 m, area 7.48 m2.
The total separation area is 9.85 m2
MSS - a gloved straw drum above the shakers
Visual control of the Varpy tipping elevator
Bunker capacity - 11,000 Itr.
Unloading auger standard (6.8 m); unloading height - 4.36 m; discharge speed - 110 1/s..
Fan - turbine (6 sections)
Electronic fan control from the cabin
Standard sieve system
Electronic control of screens from the cabin
Sieve area 5.8 m2.
Straw chopper Special cut with 88 blades
Chaff spreader
The mowing carriage hook is automatically locked
C-Motion multi-function control lever - all main functions are controlled with one lever
Cebis is a computer management, control and information system. Color monitor, large diameter.
Lithuanian language with card reader.
Telematics basic - for monitoring the harvester from home
Driver's seat with pneumatic shock absorber, passenger seat
Automatic air conditioner
Working light High End
Number holder with lighting
Lighthouse - 2 pcs.
The rear-view mirrors are mechanically controlled
Tool box
Additional fuel filter
Fuel tank capacity 800 l.
Fire extinguisher
Hydrostatic chassis
Transport speed 25 km/h
Fixed rear axle
Front wheels 900/60R32
• Rear wheels 600/55-26.5
• Quantimeter - quantity and moisture meter
• Preparation for license plate with lighting
• Adjustable rear axle
• The rearview mirrors are electrically controlled
Width ~3.5 m, height ~3.97 m, length ~9.10 m, weight ~14,800 kg (without mower)
Piaunamoi
Mower Vario 770. Working width - 7.70 m.
The cutting unit is connected to the combine with a quick connection, which has all the necessary hydraulics and electricity installed in one connection.
Centralized lock - after attachment, the mower is locked with one lever
Hydrostatic bender drive. Automatic speed adjustment of benders (speed of rotation of benders is programmed depending on driving speed). The position of the bender is adjusted hydraulically (by pressing a button from the cab)
The copper mower has the ability to push the scythe forward by 20 cm or pull it back by 10 cm (for rapeseed culture + 60 cm), this is very important when cutting lying crops.もっと表示する
UAB Ivabaltė
Vandžiogalos g. 30 LT-58151 Kėdainių r. sav Kauno Apskritis リトアニア
13
マスカス利用歴（年）メール通知を受け取る
不審な掲載機械を報告