| その他情報 | Korean precision and accuracy LS
Tractors of the MT
series are tractors which, due to their dimensions, are called super-compact tractors. LS MT tractors
are sold with engines of various power, e.g. 21.5HP (LS MT1.22) or 24.7HP (LSMT1.25), and for each model in the offer, the manufacturer offers a complete range of accessories
such as: loader tur, or a mower or excavator mounted on the back of the tractor.
LS MT1.25 - modern, powerful, perfect
The smallest sub-compact tractor
available from LS Tractor
, which has no competition in the mini tractor class. Modern design
, reliable engine (Yanmar technology), compact dimensions and the ability to connect dedicated accessories such as:
cross-axle mower , front loader , tractor excavator attached to 3 three-point linkage , Traktorek MT1.25
was created for work in households where the size of the tractor is important, but this does not mean that it will not work in a municipal company or a farm. The LS MT1.25
tractor
is designed both for experienced operators and for people who are just starting their adventure with operating and working with a tractor in a home garden or small farm.
Small - strong and very durable The LS MT1.25 compact tractor
is a tractor with a Yanmar 3TNV80F
3-cylinder
24.7 hp
diesel engine with direct fuel injection, 4 x 4
drive and a hydrostatic transmission with two pedals, one for forward and one for reverse. The tractor
has a gear reducer that allows you to drive the tractor at two different speeds, both forward and reverse. The LS MT1.25
is only 2470mm long and 1190mm wide
for a weight of 675kg
. The whole is complemented by power steering
, two PTO/PTO power shafts
(rear and middle), 3-point hitch of the first category with a lifting capacity of about 450 kg
.
Maintenance mower
- inter-axle LS LM1160
A maintenance mower
is a mower designed for mowing large areas
, where mowing takes place regularly and when we care about nicely mowed grass. Maintenance mower LM1160
for maintenance mower - inter-axle, which means that it is mounted between the axles of the tractor. The cutting element consists of three knives, which are driven by a V-belt through an angle gear connected to the central power take-off shaft. The mower is dedicated to M1
series tractors for the LS MT1.22
and LS MT1.25 models. The mower has been designed so that connecting and disassembling the device takes as little time as possible and the operation itself is very easy to perform even for a less experienced operator.
High technology in a compact edition
Durable construction and efficient operation of the device was possible thanks to the use of the best materials and technological solutions, thanks to which the LM1160
mower is very efficient, gives high quality of cut, is low in failure, and its operation is very quiet and emits little heat during operation. The mower for LS tractors is lowered and raised hydraulically, and the cutting height is adjusted with the support wheels by setting them in the appropriate position required by us. Highlights and some data:
mowing width: 1521 mm, total width: 1921 mm, weight: 129 kg, number of knives: 3 pcs, maximum rotation of the knife: 2650 rpm, gear ratio: 1:1.06, mowing height adjustment with support wheels: 4 ranges. |