| その他情報 | Versatility and performance The XJ
series is a series that is characterized by strength and durability
, during all-day work in any terrain, for 12 months a year, regardless of the season and weather conditions. LS XJ tractors
have no limits to what you can do. Thanks to a large number of tools and additional three-point linkage equipment compatible with the tractor, the tractor
, apart from the standard equipment (option), such as a TUR front loader or a central mower and a three-point linkage
excavator (option) ,
can be equipped with many other machines and devices operating on the PTO/PTO
tractor, such as a snow blower, snow plow, sand spreader or sprayer.
The XJ25 is an amazing sub-compact tractor The XJ series
is primarily an ecological and economical engine that reduces vibrations and is environmentally friendly. LS
XJ
series are two versions of tractors with a power of 24.4 HP with two different gearboxes:
LS XJ25 MEC / 24.4 HP / manual gearbox, LS XJ25 HST / 24.4 HP / hydrostatic gearbox
, elegant and modern body line
has been combined with many amenities for the operator, such as:
intuitively placed control levers, PTO/PTO shaft on/off with knob or button (solenoid valve), comfortable seat, maximum forward speed 23.7 km, The leader in the sub-compact series / strong and very durable The LS XJ25 HST
tractor is a tractor with a 3-cylinder
Mitsubishi S3L2
-Z561GT diesel engine with 4WD drive
and a hydrostatic gearbox
(the tractor is also available with a manual gearbox). The tractor
has 2 rear and inter-axle PTO shafts
, which are switched on with a button or knob, depending on the tractor version. Power steering
, 3-point
rear three-point linkage
Cat I
category with a lifting capacity of 650 kg
, 1 speed PTO/PTO 540 rpm, ROPS
safety bar, these are the most important features of the LSXJ25
tractor. The whole is complemented by the dimensions and weight of the tractor, which without additional equipment weighs 830 kg
with a length of 2742 mm
and a width of 1140 mm
.
The 120 cm sweeper
with a 4FARMER
basket is attached to the tractor
through the rear three-point linkage Cat I and Cat II and is driven by the power take-off shaft (PTO). The working width of this model is 120 cm.
How does a sweeper work? The cleaning mechanism is a roller on which dense bristles made of polypropylene are placed. It is powered by the power transmitted from the tractor. The sweeper
is equipped with a basket located behind the roller. The roller, rotating, removes the impurities, collecting them in the basket. The container is opened hydraulically by means of a hydraulic cylinder (hydraulic outputs from the tractor are required).
A machine for special tasks. In addition, the sweeper
is extended with a water container
and a side brush. By choosing such a set, when working with a sweeper with a water tank, we limit the amount of floating dust and pollution. Sprinkling with water also allows for more effective removal of dirt from the surface.
The side brush
, on the other hand, is placed on an adjustable arm, it sweeps impurities from the surface and nooks and crannies to which the sweeper shaft
has no access. Most often these are places near curbs, walls, shelves. The side brush
is mounted on the right side of the sweeper
.
Side brush bristles are made of two types of material - polypropylene bristles and wire bristles, The diameter of the side brush is 50 cm, Possibility of adjusting the brush setting in three planes. A noteworthy advantage is the reaction of the brush when encountering an obstacle - the brush moves back and then returns to its original position after passing the obstacle. When properly positioned, the side brush
(brush face) should be slightly tilted forward. Appropriate adjustment of the height and angle of the side brush
will increase the efficiency of sweeping and reduce excessive wear of the brush.
The effective operation of the sweeper for the tractor
is ensured by the guide wheels, enabling the appropriate setting of the sweeper
to the surface on which we are working. It should be remembered that too much pressure of the bristles on the surface to be cleaned will cause excessive wear. |